fbpx
You are Here
HP HPE2-W09 Reliable Exam Materials – HPE2-W09 Exam Tests

HP HPE2-W09 Reliable Exam Materials – HPE2-W09 Exam Tests

1 min read

ActualPDF’s HPE2-W09 Aruba Data Center Network Specialist Exam exam questions contain HP HPE2-W09 real questions and answers that have been compiled and verified by HP specialists in the field. This demonstrates that the real questions and answers in the HPE2-W09 Aruba Data Center Network Specialist Exam material are legitimate for the HPE2-W09 Aruba Data Center Network Specialist Exam practice exam. The HP HPE2-W09 practice questions are intended to help you easily and confidently clear the HPE2-W09 Aruba Data Center Network Specialist Exam.

The HP HPE2-W09 exam, also known as the Aruba Data Center Network Specialist exam, is designed to test the skills and knowledge of IT professionals who work with Aruba data center networking solutions. This exam evaluates the candidate’s ability to design, implement, configure, and manage Aruba data center networks. It is a certification exam for IT professionals who want to validate their skills and knowledge in this area.

>> HP HPE2-W09 Reliable Exam Materials <<

Valid HPE2-W09 exam materials offer you accurate preparation dumps – ActualPDF

It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related HPE2-W09 certification is the best way to show our professional ability, however, the HPE2-W09 Exam is hard nut to crack but our HPE2-W09 preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the HPE2-W09 exam.

HP Aruba Data Center Network Specialist Exam Sample Questions (Q91-Q96):

NEW QUESTION # 91
Is this a way that a data center technology can help meet requirements for multi-tenancy?
Solution: Virtual Extensible LAN (VXLAN) enables multiple isolated Layer 3 domains, each with its own routing table, to share a physical network.

  • A. Yes
  • B. No

Answer: B

Explanation:
Virtual Extensible LAN (VXLAN) enables multiple isolated Layer 3 domains, each with its own routing table, to share a physical network is not a way that a data center technology can help meet requirements for multi-tenancy. Multi-tenancy is the ability to provide logical separation and isolation of network resources for different tenants or customers on a shared physical infrastructure. VXLAN is a feature that provides Layer 2 extension over Layer 3 networks using UDP encapsulation. VXLAN does not enable multiple isolated Layer 3 domains, but rather multiple isolated Layer 2 domains, each with its own VNI1.

NEW QUESTION # 92
Refer to the exhibit.

The company wants AtubaOS-CX switches to provide VXLAN services for several VMs and servers, as shown in the exhibit. Hypervisors will not run VXLAN for this solution. Is this part of a valid configuration to meet the requirements?
Solution: Attach VNIs 5010 and 5020 to interface 1/1/3 on Switch-2.

  • A. No
  • B. Yes

Answer: B

NEW QUESTION # 93
Refer to the exhibit.

You need to set up an ArubaOS-CX switch to implement Virtual Extensible LAN (VXLAN) WITHOUT Ethernet VPN (EVPN). The exhibit Indicates which servers should be part of the same VXLANs and the desired VNls for the VXLANs. Assume that the network is already configured to permit each ArubaOS-CX switch to reach each other switch’s loopback interface.
Is this part of the process for setting up VXLAN to meet the requirements?
Solution: On Switch-1, create two VXLAN interfaces, one with ID 5010 and one with 1D 5020; both VXLAN interfaces should use 192.168.1.1 as the source IP address.

  • A. No
  • B. Yes

Answer: B

Explanation:
VXLAN is a feature of ArubaOS-CX that provides layer 2 connectivity between networks across an IP network1. VXLAN uses a 24-bit identifier called VXLAN Network Identifier (VNI) to segment the layer 2 domain1. VXLAN also uses a tunnel endpoint (VTEP) to encapsulate and decapsulate VXLAN packets1. A VXLAN interface is a logical interface that represents a VNI and is associated with a source IP address and a VRF1. To set up VXLAN without EVPN, you need to create VXLAN interfaces on each switch and configure static VTEP peers1. Based on the exhibit, Switch-1 needs to create two VXLAN interfaces, one with ID 5010 and one with ID 5020, to match the VNIs of the servers connected to it. Both VXLAN interfaces should use 192.168.1.1 as the source IP address, which is the loopback interface of Switch-1. Therefore, this is part of the process for setting up VXLAN to meet the requirements, and the correct answer is yes. For more information on VXLAN and EVPN, refer to the Aruba Data Center Network Specialist (ADCNS) certification datasheet2 and the EVPN VXLAN Guide for your switch model1.

NEW QUESTION # 94
Refer to the exhibit.

Switch-1, Switch-2, and the router run OSPF on LAG 100, which is a Layer 3 LAG. Does this correctly explain how to control how core-to-access traffic Is forwarded?
Solution: To force the router to use both links, ensure that active gateway is enabled on LAG 100 on both Switch-1 and Switch-2.

  • A. Yes
  • B. No

Answer: B

Explanation:
The exhibit shows a network topology where Switch-1 and Switch-2 are part of a Virtual Switching Extension (VSX) fabric, and the router runs OSPF on LAG 100, which is a Layer 3 LAG. The question asks how to control how core-to-access traffic is forwarded, which means how the router chooses between the two links to Switch-1 and Switch-2. To force the router to use both links, ensuring that active gateway is enabled on LAG 100 on both Switch-1 and Switch-2 is not the correct solution. Active gateway is a feature that allows both VSX members to act as the default gateway for downstream devices, using a common virtual MAC address. Active gateway does not affect how upstream devices, such as the router, forward traffic to the VSX members1. To force the router to use both links, the correct solution is to configure equal-cost multi-path (ECMP) in OSPF on the router. ECMP is a feature that allows a router to load balance traffic across multiple paths with the same cost. ECMP can be configured using the maximum-paths command and specifying how many equal-cost paths the router should use2. Therefore, this does not correctly explain how to control how core-to-access traffic is forwarded.

NEW QUESTION # 95
Refer to the exhibits.


Is this how the switch-1 handles the traffic?
Solution: A broadcast arrives in VLAN 10 on Switch-1. Switch 1 forwards the frame on all interfaces assigned to VLAN10. except the incoming interface. It replicates the broadcast, encapsulates each broadcast with VXLAN. and sends the VXLAN traffic to 192.168.1.2 and 192.168.1.3.

  • A. Yes
  • B. No

Answer: B

NEW QUESTION # 96
……

It is known to us that the knowledge workers have been playing an increasingly important role all over the world, since we have to admit the fact that the HPE2-W09 certification means a great deal to a lot of the people, especially these who want to change the present situation and get a better opportunity for development. If you also want to work your way up the ladder, preparing for the HPE2-W09 Exam will be the best and most suitable choice for you. If you are still hesitating whether you need to take the HPE2-W09 exam or not, you will lag behind other people.

HPE2-W09 Exam Tests: https://www.actualpdf.com/HPE2-W09_exam-dumps.html

Tags: HPE2-W09 Reliable Exam Materials,HPE2-W09 Exam Tests,HPE2-W09 Study Material,Exam HPE2-W09 Dumps,HPE2-W09 Latest Test Pdf

Share

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Have Missed

Business

Assessing Cultural Fit When Hiring Android Developers: Company Values and Team Dynamics

4 min read
General

How to choose the right publishing platform for your book

3 min read
Health & Fitness

Mebendazole: Uses and Side Effects

7 min read
Education

Global Military Rotocraft Market Projected to Witness Substantial Growth: Analysis and Statistics 2019-2027

4 min read